Entrepôt technologique à guichet unique - Appelez-nous au 0893756617

One Stop Tech Warehouse - Envoyez-nous un e-mail : info@polartech.com.au

🛠️ How to Replace iPad Pro 2018 11-inch Screen

🛠️ How to Replace iPad Pro 2018 11-inch Screen

How to Replace iPad Pro 2018 11-inch Screen

If your iPad Pro 2018 11-inch has a cracked or faulty screen, don’t panic. The display and touch are still fine in many cases — but replacing the whole screen is the safest and cleanest solution. Even if you were only looking at glass-only repairs, this guide will still give you a clear idea of what’s involved.

🔧Tools & Materials

  • Polar Tech Magic Self-Heating Pad 

  • Polar Tech Phone Repair Toolkit (Isopropyl alcohol ,Metal shim, Plastic pry card, Tweezers, Spudger, Precision screwdriver set)

Step 1: Power Down & Heat Things Up

  • Switch off your iPad completely.

  • Place Polar Tech Magic Self-Heating Pads around the edges and warm the screen for about 10 minutes.    

     

    This softens the adhesive, so you won’t feel like you’re peeling off superglue from your desk.     

     


Step 2: Lift & Disconnect

  • Start with a suction cup, slide in a thin tool, and add a little isopropyl alcohol to loosen things.Carefully work your way around, especially near the top camera (Face ID cable = short + sensitive).

  • Remove a couple of screws, disconnect the BTB connectors, and the screen will flip open like a book.


Step 3: Transfer Key Parts

  • Move over the Face ID flex cable, magnets, and two extra flex cables from the old screen.Use a plastic tool and a touch of alcohol for safe lifting.

Pro tip: avoid poking the sensors unless you enjoy a non-functioning Face ID.


Step 4: Reinstall & Test

  • Screw back the brackets, reconnect the BTB connectors, and put the screen in place.

  • Power it on before sealing — make sure display + touch work perfectly.

  • Clamp it for about 2 hours for a strong bond.

  • Done! Your iPad Pro is back in action, looking fresh and ready for Netflix or spreadsheets (no judgment).


Final Tip: Even though this guide shows a full screen replacement, the same careful approach applies if you were only replacing the glass. Just remember — patience beats brute force every time.

📩 Need help with your device?

If you have any questions or need further details,contact us or leave a comment below. We’re always happy to help.

👋 See you in the next one!

📷 Bonus: Want to See the Process?

Watch our full teardown and battery replacement video here:
👉 [YouTube Link]

Where can I buy replacement screen and tools?

[Ori] Apple iPad Pro 11"2018 & iPad Pro 11'2020 OEM Touch Digitiser Glass LCD Display Screen Assembly: https://www.polartech.com.au/collections/apple-ipad-screen/products/ori-apple-ipad-pro-11-2018-ipad-pro-11-2020-oem-touch-digitiser-glass-lcd-display-screen-assembly

[PT-H01] Magic Self-Heating Pad: https://www.polartech.com.au/products/pt-h01-magic-self-heating-pad

[NS05] [5 in 1 Set]Ultra-Thin Stainless ScreenDisassemble Blade Opening Tool: https://www.polartech.com.au/products/jns05-5-in-1-set-ultra-thin-stainless-screen-disassemble-blade-opening-tool

[PT-T13] [27 in 1] Polar Tech Phone Repair ToolkitScrewdriver Basic Kit Set For Smart Phone &Tabet: https://www.polartech.com.au/products/pt-t13-27-in-1-polar-tech-phone-repair-toolkit-screwdriver-basic-kit-set-for-smart-phone-tabet

[TE-03] Opening Tool Soft Blade Pry Bar OpenRepair Tool Kit: https://www.polartech.com.au/products/te-03-opening-tool-soft-blade-pry-bar-open-repair-tool-kit

[CXD-01] [15cm x20cm] Magnetic Project MatScrew Magnet Memory Phone Repair Working Pad: https://www.polartech.com.au/products/cxd-01-15cm-x-20cm-magnetic-project-mat-screw-magnet-memory-phone-repair-working-pad

[CHF1] [With Ruler] Mobile Phone Repair Plastic Separating Card Disassemble Pry Opening Tools: https://www.polartech.com.au/products/chf1-with-ruler-mobile-phone-repair-plastic-separating-card-disassemble-pry-opening-tools

 

Poste un commentaire